Services

We can offer a wide range of materials needed for the manufacture and maintenance of rotary die cutters, as well as machinery and tools for the manufacture of dies (e.g. benders, guillotines, notchers, workbenches), and any other spare parts that are required:

Knives and rubber for rotary die cutting

maderas

WOOD

We have sizes to suit all types of rotary machines.

goma_oxigenada

OXYGENATED RUBBER FOR EJECTION AND GUIDING

Use: For EJECTING cuts.

Standard sizes:

  • RED RUBBER 15 x 17 mm (outer)
  • RED RUBBER 20 x 20 mm (inner)

Use: For GUIDING movement of the plate and separation from the cutting die.

Size:

  • RED RUBBER 15 x 17 mm (outer)

Note: Other sizes of red rubber are available on request..

goma_vulkollan

VULKOLLAN RUBBER

Use: EJECTION for slots and small inner cuts.

Standard sizes:

  • Hardness 35 shores. Thickness 15, 17 and 20 mm.
  • Hardness 50 shores. Thickness 17 and 20 mm.

Available in:

  • Sheets of 500×250 mm.
  • Strips of 15×15, 17×17 or 20×20 mm.

goma_poliuretano

VULKOLLAN YELLOW RUBBER WITH POLYURETHANE COATING

Use: EJECTION for slots and small inner cuts. Specially designed for boxes with lots of imprints.

Standard sizes:

  • Hardness 35 shores. Thickness 17 and 20 mm.
  • Hardness 50 shores. Thickness 17 and 20 mm.

Available in:

  • Sheets of 500×250 mm.
  • Strips of 17×17 or 20×20 mm.

goma_hendido

KUSHION CREASE RUBBER

Use: Protection of creasing, normally for circular or curved creasing.

Sizes:

  • KUSHION .315″ = 8 mm.
  • KUSHION .325″ = 8.26 mm
  • KUSHION .335″ = 8.51 mm
  • KUSHION .355″ = 9.02 mm

dieprene_2

DIEPRENE RUBBER

Use: Adjustment of the corrugation for the gluing of boxes, their assembly in certain cases and the protection of the circular crease in favour of the channel, avoiding breakage or tears in the paper or the inner face of the card.

Sizes:

  • Strips of 9×6.35 mm.
  • Strips of 8×6,35 mm.

Other sizes available on request

pinchos_encolado

GLUE SPIKES

Product developed as a result of a partnership between the R&D departments of TOOLS and RODICUT.

Use: To facilitate gluing for double wall cardboard.  

Sizes:

  • Sheets of 225×230 mm

hendidos_rectosycurvos

STRAIGHT AND CURVED CREASES

Standard sizes and models

  • 22.86 = 900″ 4 pt y 8pt
  • 23.11 =910″  4pt y 8 pt These two sizes are for STRAIGHT creasing

Standard sizes for curved creasing:

  • 22,60 = 890″ 4pt and 8pt
  • 22.86 =900″ 4pt and 8 pt. These are the most common sizes for the manufacture and good performance of creasing. Other sizes are available for both straight and curved creasing.

Note: For 8 point creases (laser head) the following forms are available: round head (the most common), flat head, Trufoll male head, Trufoll female head, and in 4pt smooth and corrugated.

cuchillas

KNIVES

We have the best knives for rotary die cutting manufacture.

For the manufacture of a cutting die and the best performance of covers we recommend different heights of knives (higher for straight and lower for curved).

We can offer any knife height although the most common are:

  • 25.40 =1000″ These are the sizes
  • 25.98 =1023″ most commonly used for
  • 26.16 =1030″ STRAIGHT KNIVES although others are available.
  • 25.10 = 990″ These are the sizes
  • 25.40 =1000″  most commonly used for
  • 25.93 =1023″ CURVED knives although others are available.

These knives are offered with side and central bevel options.

perforados_y_corte

PERFORATORS AND CREASERS

Standard sizes and model

  • 24.64 =970″ straight
  • 24.10 =950″ curved.

These are the most common sizes although others are available, including to ensure they do not pass through the paper.

There are different sizes for creasing and perforating. The most common are:

  • Perforated 3×3, 6×6, 8×8, 10×10, 12×12, 15×15.
  • Creased 6×6, 8×8, 10×10, 12×12, 15×15, 20×20,

Note: other passes are available on request (e.g. 10×3, 10×4, 15×3). We have machinery to carry out any type of pass.

materiales_para_fabricacion

MATERIALS FOR THE MANUFACTURE OF MATERIALS

TOOLS can provide the following products:

Hide hammers (traditional) polyurethane hammers (long-life)

Pincers (extraction of knives), scissors, cutters, chisels, aluminium hoops (Posilock system), fastening bars, pliers, pneumatic grinders and drills, bolts, washers.

protectores

KNIFE PROTECTORS FOR STORING CUTTING DIES

The protectors avoid the deformation of the blade during storage.

MENU